Agilent Technologies E5071C Manual page 1113

E5071C
Stopping a VBA Program
Stopping a Procedure
•
Abruptly Terminating a VBA Program
•
Other topics about Operation Basics
Stopping a Procedure
This section describes how to break a procedure during the execution of a
VBA program.
1. To break the running VBA program, do one of the following:
On the Run menu, click Break.
•
On the toolbar, click "Break Macro" icon.
•
Press
•
•
Macro Setup
Press
•
2. A dialog box is displayed through forced interrupts, and the program
is suspended.
Select one of the following:
Continue: Resumes the execution of the program.
•
End: Terminates the VBA program.
•
Debug: Displays a run-time error.
•
Help: Brings up VBA Online Help.
•
Abruptly Terminating a VBA Program
This section describes how to abruptly terminate a running procedure.
When abruptly terminating the VBA program by the below methods, the
"Program interrupted" message is shown in the instrument status bar on
the bottom of the LCD display.
1340
+ keys on the keyboard.
Ctrl Break
> Stop (E5071C measurement screen)
key on the E5071C front panel.
Macro Break