Agilent Technologies E5071C Manual page 1110

The Macros dialog box has the following user interface elements:
1. Macro Name: Select the VBA program (procedure name) you want to
run from the list box so its name appears here.
2. Macro In: Specify the project that contains the VBA program you
want to run. Normally, use the default.
3. Run: Clicking this button runs the selected VBA program
(procedure).
4. Cancel: Clicking this button closes the Macros dialog box and brings
you back to the main screen.
5. Step Into: Clicking this button brings up Visual Basic Editor and put it
into step-in mode, where the selected VBA program is run step by
step. This mode is primarily intended for use when debugging a VBA
program. For more information on step-in mode, see Debug Toolbar.
6. Edit: Displays the code of the selected VBA program. You can use
this for re-editing your code.
7. Create: This button is normally dimmed.
8. Delete: Clicking this button deletes the selected VBA program. Take
care not to inadvertently delete your VBA program before saving it.
The Macros dialog provides access to subprograms (procedures enclosed
between Sub and End Sub) created in a standard module.
Running a Program from the E5071C Measurement Screen
Programming
1337