Ruijie Networks RG-S2600E Series Cli Reference Manual page 1142

S2600E CLI Reference Guide
Management
Default
Command
mode
Usage
guidelines
Examples
Chapter 2 Configuration Commands of Configuration File
shown in the ordinary text format.
Show the memory usage of the
statistics
configuration log.
N/A.
Privileged mode.
The start-num patameter must be specified when showing
the configuration logs without the all specified. Use the
end-num parameter to specify the range of the
configuration logs to be viewed. When the configuration
log entry that corresponding to the specified end-num is
not existent, show all configuration logs from the start-num
to the record number that is less than the end-num.( if the
end-num is specified to 0, show all configuration logs
starting with the start-num). On condition that the
configuration log entry that corresponding to the specified
start-num is not existent, show the configuration logs
starting with the record number that is larger than the
start-num. If the provisioning is specified, show the
configuraitons in the format that is in the configuration files.
The following example shows the configuration logs
numbered 1 to 2:
Ruijie# show archive log config 1 2
idx sess user@line
1 1 unknown@console Mar 21 09:57:22 | logging enable
2 1 unknown@console Mar 21 09:57:46 | logging size 50
Field
idx
sess
user@line
datetime logged command
Description
The record number of the
configuration log entry.
Session number related to this
configuration log entry.
Username and line name of
generating this configuration log
entry.