Logging Trap - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
Usage
guidelines
Examples
Related
commands
7.1.14
Use this command to set the severity of logs that are allowed to be sent to the
syslog server. The no format of the command disables sending the logs to the
syslog server.
logging trap level
no logging trap
Parameter
description
Default
configuration
Command
mode
Chapter 7 Syslog Configuration Commands
This command enables synchronization function of user
input and log output, preventing the user from interrupting
when keying in the characters.
Ruijie(config)#line console 0
Ruijie(config-line)#logging synchronous
Print UP-DOWN logs on the port when keying in the
command, the input command will be output again:
Ruijie#configure terminal
Oct 9
GigabitEthernet 0/1, changed state to down
Oct 9 23:40:55 %LINEPROTO-5-UPDOWN: Line protocol on
Interface GigabitEthernet 0/1, changed state to DOWN
Ruijie#configure terminal
the user is output again rather than being intererupted.
Command
show
running-config

logging trap

Parameter
level
Informational(6).
Global configuration mode.
23:40:55 %LINK-5-CHANGED:
the input command by
----
Description
View the configuration.
Description
Severity of the log message. The
name of the severity or the numeral
can be used. For the details of log
severity, see Table 60-1.
Interface