Ruijie Networks RG-S2600E Series Cli Reference Manual page 1159

S2600E CLI Reference Guide
command to restore to the default value.
poe-power upper upper
no poe-power upper
Parameter
description
Command
mode
Usage
guidelines
Examples
6.2 Show Related Command
6.2.1
Use this command to view the POE status of the interface.
show poe interface(s) [interface-id]
Command
mode
Usage
guidelines
Exampl
es
Chapter 6 POE Management Configuration Commands
Parameter
upper
Global configuration mode。
This command is used to set the maximum allowed voltage.
The following example sets the maximum allowed voltage
of the current POE system as 56000 mv.
Ruijie# configure
Ruijie(config)# poe-power upeer 56000
Ruijie(config)# end
show poe interface(s)
Privileged EXEC mode.
This command is used to view the POE status of the specified
interface or all interfaces.
Ruijie# show poe interface gigabitethernet 0/2
Interface : Gi0/2
Port power enabled : ENABLE
Port connect status : OFF
Port PD Class : no PD devices
Port max power : 15400 mW
Description
Maximum allowed voltage, within
the range [55000 to 57000] mv.