Ruijie Networks RG-S2600E Series Cli Reference Manual page 1172

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
7.1.10
Use this command to record the logs in the specified Syslog sever. The no form
of the command deletes the Syslog server with specified address from the
Syslog server list.
logging server {ip-address [vrf vrf-name] | ipv6 ipv6-address}
no logging server {ip-address [vrf vrf-name] | ipv6 ipv6-address}
Chapter 7 Syslog Configuration Commands
except
severity
Disabled.
Global configuration mode.
Use this command to control the syslog outpt to prevent
the massive log output.
The example below sets the number of the logs (including
debug) processed in a second as 10. However, the logs
with warning or higher severity level are not controlled:
Ruijie(config)#logging rate-limit all 10 except warnings
Command
show logging
count
show logging
logging server
console in a second.
By default, the severity level is
error(3). The rate of the log whose
severity level is less than or equal to
this severity level is not controlled.
Log severity level with the range from
0 to 7. The lower the level is, the
higher the severity is.
Description
Show the log statistics.
Show the logs and related log
configuration parameters in the buffer.