Ruijie Networks RG-S2600E Series Cli Reference Manual page 1154

S2600E CLI Reference Guide
5.1.2 device-description
Use this command to configure the alias of the device member.
device-description [member member] description
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
5.1.3 member
member member
Parameter
description
Command
mode
Usage
guidelines
Examples
Chapter 5 Stack Management Configuration Commands
Parameter
member
member
description
Global configuration mode.
After executing the write command to save the
configuration, this configuration takes effect.
The following example shows how to set the alias of
member 2 to red-giant:
Ruijie(config)# device-description member 2 red-giant
Command
show member
Parameter
member
Global configuration mode.
Use this command to enter the member device, avoiding
inputting the member ID when entering the interface mode.
The following example shows how to enter the member
device2:
Description
Specify the member ID. If the member
ID is not configured, use this command
to set the priority of member 1.
The member description, up to 31
characters.
Description
Show the detailed information about the
stack members.
Description
Specify the member ID.