Ruijie Networks RG-S2600E Series Cli Reference Manual page 1141

S2600E CLI Reference Guide
Management
Related
commands
2.2.3
Use this command to show the entry information of the configuraiton log.
show archive log config {{all | start-num [end-num]} [provisioning |
contenttype [plaintext]] | statistics}
Parameter
description
Chapter 2 Configuration Commands of Configuration File
config_bak1.text
ip dhcp snooping bootp-bind
interface GigabitEthernet 0/3
ip dhcp snooping limit rate 1000
snmp-server host 1.1.1.2 traps public
Command
more
flash:config.text
show archive
config
differences
show archive log config
Parameter
all
start-num
[end-num]
provisioning
contenttype
plaintext
Description
Show the content of the config.text file in
the flash.
Show the configuration
between two specified configuration
files.
Description
Show all entry information of the
configuration log.
Specifying the start-num
showing all configuration logs starting
with this record. If the end-num is
specified at the same time, it will show
the configuration logs with the record
number between the start-num and
end-num. if the start-num is 0, it will
show the configuration logs from the
first entry. If the end-num is 0, it will
show all configuration logs starting with
the start-num. The start-num and
end-num are both in the range of 0 to
2147483647.
Show the configuration logs in the
format shown in the configuration file.
Specify the showing format of the
configuration logs.
Specify the configuration logs to be
differences
means