Fuse/Relay Junction Box Removal - TOHATSU BFT115A Service Manual

FUSE/RELAY JUNCTION BOX
REMOVAL/INSTALLATION
Disconnect the battery negative (–) cable, then the
positive (+) cable from the battery.
Remove the engine cover.
FUSE/RELAY JUNCTION BOX
BOLT (6 x 20 mm) (4)
5 N·m (0.51 kgf·m, 3.7 lbf·ft)
BOLT (6 x 12 mm) (3)
5 N·m (0.51 kgf·m, 3.7 lbf·ft)
ALTERNATOR
FUSE CABLE
STARTER
STARTER
CABLE (+) 2
CABLE (+) 1
OTHER ELECTRICAL
10P CONNECTOR
MAIN WIRE
HARNESS
23P CONNECTOR
8P CONNECTOR
10-3