TOHATSU BFT115A Service Manual page 582

GEAR CASE (COUNTER ROTATION)
Install the taper bearing (outer race) (1) into the bearing
holder (2) using the special tools and a hydraulic press
as shown.
TOOLS:
Driver (3)
Taper bearing installer
attachment (4)
Place a wood block (1) under the forward bevel gear
(2).
Place the bearing holder (3) onto the forward bevel
gear.
Apply gear oil to the inner wall of a new taper bearing
(inner race) (4).
Install the taper bearing (inner race) into the forward
bevel gear using the special tool and hydraulic press.
• Install by applying gear oil between the inner and
outer races of the taper bearing.
TOOLS:
Driver (5)
Attachment, 62 × 68 (6)
PROPELLER SHAFT HOLDER
DISASSEMBLY/ASSEMBLY
DISASSEMBLY
Remove the needle bearing (30 x 37 x 26 mm) (1) from
the propeller shaft holder (2) using the special tools.
TOOLS:
Remover handle (3)
Bearing remover, 30 mm (4)
Remover weight (5)
17-36
07749-0010000
070PF-ZY60100
(2)
07749-0010000
07746-0010500
(2)
07936-3710100
07936-8890300
07741-0010201
(1)
(4)
(5)
(6)
(2)
(4)
(3)
(1)
(4)
(3)
(1)
(5)
(3)