TOHATSU BFT115A Service Manual page 386

ENGINE REMOVAL/INSTALLATION
Remove the four bolts (8 × 30 mm) (1) that secure the
exhaust guide from the under side of the mounting
case.
Remove the following fasteners:
• Two cap nuts (1)
• Bolt (12 x 83 mm) (2)
• Two bolts (8 x 55 mm) (3)
• Bolt (10 x 70 mm) (4)
• Be sure that the hanger chains are hooked on the
three engine hangers securely.
13-4
Viewed from the under side of
the mounting case:
(2)
(3)
(1)
(1)
(4)