TOHATSU BFT115A Service Manual page 342

OTHER ELECTRICAL
Remove the bolt (6 x 12 mm) (1) and ground terminal (2) of the power tilt relay.
Remove the four bolts (6 x 14 mm) (3).
Remove the connector bracket A (4), power tilt relay (5) and relay bracket (6) as a set.
Remove the two wire clips (7) from the relay bracket.
Remove the two wire clips (8) from the connector bracket A.
Remove the two bolts (6 x 22 mm) (9) and power tilt relay.
Installation is in the reverse order of removal.
(2)
(1)
(5)
10-12
(4)
(9)
(7)
(6)
(3)
(7)
(8)