TOHATSU BFT115A Service Manual page 411

CYLINDER HEAD
Wipe off the oil and clean the crankshaft (1) outer
(3)
(2)
surface using a shop towel.
Install the crank pulser plate (2) with the "OUT-SIDE"
(1)
mark (3) facing out.
Install the cam chain guide B (1) and tighten the two
(1)
(2)
bolts (2) to the specified torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Install a new chain case packing (1) and chain case O-
ring (2) to the chain case.
(1)
(2)
14-19