TOHATSU BFT115A Service Manual page 266

ENGINE COVER/COVER LOCK
Install the tabs (1) of the rear side (cylinder head cover
side) of L. engine under cover (2) into the grooves (3) of
the R. engine under cover (4).
• Be sure that all tabs and grooves are completely
aligned with each other.
Install the three collars (1), then loosely install the three
screws (6 x 25 mm) (2) and six special bolts (6 x 17
mm) (3) to the L. engine under cover (4).
• Be sure that the special bolt flange is positioned in
the case bolt hole.
Tighten the three screws and six special bolts to the
specified torque in the numbered order in several steps.
TORQUE:
Screws:
Special bolts: 10 N·m (1.0 kgf·m, 7 lbf·ft)
• Be sure that all tabs and grooves are completely
aligned with each other.
6-8
4.5 N·m (0.46 kgf·m, 3.3 lbf·ft)
(1)
(2)
(2)
6
1
2
4
3
5
(3)
(4)
(3)
(4)
(3)
(1)
(4)
7
8
9
(1)/(2)