FRONT SEPARATE COVER REMOVAL/
INSTALLATION
REMOVAL
Remove the engine cover.
Loosen the under case grommet band (1) and remove it
from the under case grommet (2).
Remove the special bolt (6 x 17 mm) (3), three screws
(6 x 25 mm) (4), three collars (5) and front separate
cover (6).
INSTALLATION
Install the front separate cover (1) by aligning its rear
(R. engine under cover side) groove (2) with the tab (3)
of the R. engine under cover (4) and aligning its front
(under cover front bracket side) tab (5) with the groove
(6) of the under cover front bracket (7).
ENGINE COVER/COVER LOCK
(2)
(6)
(5)
(3)
(4)
(6)
(5)
(1)
(3)
(1)
(4)
(2)
(1)
(7)
6-3