TOHATSU BFT115A Service Manual page 301

If the rear bearing (1) is removed, replace it with a new
one.
Install the washer (2) to the rotor shaft (3).
Apply grease to the inner surface of new bearing and
install it to the rotor shaft.
Attach the special tool to the front bearing (1) side of the
rotor shaft (2), then set the rotor to a hydraulic press.
TOOL:
Attachment, 52 × 55 mm (3)
Attach the special tool to the rear bearing (1) side and
install the rear bearing and bearing cover to the rotor,
using a hydraulic press.
TOOLS:
Driver, 22 mm I.D. (2)
Attachment, 15 mm I.D. (3)
(1)
(3)
(1)
07746-0010400
(2)
07746-0020100
07746-0020200
(2)
(1)
CHARGING SYSTEM
(2)
(3)
(3)
7-15