TOHATSU BFT115A Service Manual page 320

STARTING SYSTEM
Remove the packing (1) from the front bracket (2).
Remove the overrunning clutch (1) and clutch fork (2)
from the front bracket (3).
Secure the gear shaft (1) by placing a wood block (2)
under the gear shaft assembly, taking care not to touch
the internal gear (3).
Prepare a pipe (4) of the following dimensions.
• I.D.: approx. 11 mm (0.4 in)
O.D.: approx. 15 mm (0.6 in)
LENGTH: approx. 20 mm (0.8 in)
Set the pipe on the gear shaft stopper (5) and drop the
gear shaft stopper into the overrunning clutch by
tapping on the pipe.
Remove the snap ring (6) using a screwdriver or
equivalent tool.
9-8
(2)
(1)
(3)
(4)
(5)
(3)
(6)
(2)
(1)
(2)
(1)
(5)