TOHATSU BFT115A Service Manual page 218

FUEL SYSTEM
INSTALLATION
Install the suspension (1) to the water separator (2) and
align the screw (3) of the water separator body (4) on
the fuel tube A (5) side with the center line (6) of the
suspension as shown.
Install the water separator to the fuel strainer stay (7).
Connect the water separator/water level sensor 2P
connector (8) and install it to the harness clip bracket E
(9).
Clamp the water level sensor wires with the harness
clip (10).
Connect the fuel tube C (11) and fuel tube A to the
water separator.
Install the L. engine under cover (page 6-4).
5-100
(8)
(9)
(10)
(7)
(4)
(3)
(6)
(11)
(5)
(2)
(1)
(5)