TOHATSU BFT115A Service Manual page 232

FUEL SYSTEM
IAC VALVE REMOVAL/INSTALLATION
Remove the engine cover.
Disconnect the IAC valve 2P connector (1).
Remove the two bolts (2) and IAC valve (3).
Remove the IAC valve packing (1).
Install a new IAC valve packing.
Install the IAC valve (1) to the intake manifold and
tighten the bolts (2) to the specified torque in the
numbered order in two or three steps.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Connect the IAC valve 2P connector (3).
Install the engine cover.
5-114
(2)
(3)
(1)
(2)
1
(1)
(1)
(3)
2