TOHATSU BFT115A Service Manual page 32

SERVICE INFORMATION
LINKAGE
Location
Shift rod A spline
Shift shaft A water seal (14 x 26 x 8 mm) lip and outer sur-
face
Shift shaft A water seal contact surface and spline
Shift shaft B water seal contact surface
Seal holder O-ring (25 x 2.4 mm)
Seal holder O-ring groove and bearing part
Click arm bushing inner surface
Click arm roller part
Shift shaft B water seal (14 x 26 x 6 mm) lip
Shift arm link pin insertion part and click part
Shift link bracket shift pivot insertion part and throttle rod
insertion part
Throttle arm bearing part, shift pivot insertion part and
throttle link insertion part
Shift pivot bearing part
Throttle rod throttle body insertion part
Throttle link throttle arm insertion part and throttle plate in-
sertion part
Shift link bracket throttle arm insertion part
Throttle plate shaft part and insertion part
Cover lock bushing A bearing part
Shift pivot plate bracket contact part
Shift slider pivot outer surface
Shift link pin outer surface
Shift shaft B water seal (14 x 26 x 6 mm) outer
circumference
LOCKS
Location
Cover lock lever-to-lever bushing A contact part
Cover lock bushing A bearing part
Hook bracket hook damper insertion part
Front lock insertion part, locking part and cable end inser-
tion part
Side lock insertion part, locking part and cable end insertion
part
Cover lock bolt tapered part and bolt shaft
Cover open shaft bearing part and lock lever sliding part
OTHERS
Location
Extension case oil case side seal surface
Steering rod collar insertion part and end face sliding part
Water joint cap nut seating surface
2-16
Material
Use marine grease
(water resistant urea based
grease)
Industrial parts cleaner solu-
tion (mixture of the Three-
bond® 2720C and water in a
ratio of 1:9)
Material
Use marine grease
(water resistant urea based
grease)
Material
Liquid sealant
(Threebond® 5222B or
equivalent)
Use marine grease
(water resistant urea based
grease)
Loctite® PRISM 403
Remarks
Remarks
Remarks