FUEL SYSTEM
INSTALLATION
Connect the air flow tube (1) to the throttle body (2) and
set the wire harness (3) into the groove (4) in the left
lower side of silencer case (5).
Install and tighten the three bolts (6).
• Be careful not to pinch the wire harness.
Tighten the air flow tube clamp screw (7).
Connect the vinyl tube (8) and crankcase breather tube
(9) to the silencer case.
Connect the IAT sensor 2P connector (1) and install the
harness band clip (2) to the silencer case (3).
Install the engine cover.
5-84
(2)
(5)
(6)
(7)
(8)
(2)
(1)
(9)
(1)
(3)
(5)
(4)
(3)