TOHATSU BFT115A Service Manual page 621

Remove the self-locking nut (25 × 2.0 mm) (1) or the
self-locking nut (7/8-14 UNF) (2) from the tilting shaft
(3).
Remove the tilting shaft, L./R. stern bracket (4)/(5), two
wave washers (6) and swivel case (7).
Remove the two swivel case bushings (8).
Remove the O-ring (9) from the inside of the tilting
shaft.
Remove the wire harness clip (10) from the L. stern
bracket.
(8)
(6)
(1)
(10)
(4)
TRIM/TILT
(7)
(8)
(2)
(3)
(9)
(5)
19-9