TOHATSU BFT115A Service Manual page 619

Remove the two bolts (1), screw (2), ground cable (3)
and anode metal (4).
Remove the self-locking nut (1), washer (2) and bolt (3).
Remove the two E-rings (1) from the upper cylinder pin
(2).
Remove the upper cylinder pin and pull off the piston
rod (3) of the power trim/tilt from the swivel case (4).
Remove the two upper cylinder bushings (5).
Remove the two bolts (1) and trim angle sensor (2).
(2)
(4)
(1)
(3)
(1)
(2)
(3)
TRIM/TILT
(3)
(2)
(1)
(1)
(4)
(5)
(2)
(1)
19-7