TOHATSU BFT115A Service Manual page 221

FUEL SYSTEM
Remove the two bolts (8 × 35 mm) (1), bolt (8 × 30 mm)
(5)
(4)
(2) and vapor separator (3) by releasing the fuel hose
(3)
(high pressure side) (4) from the hose clip (5).
(2) (1)
INSTALLATION
Install the vapor separator (1) to the engine by installing
the fuel hose (high pressure side) (2) to the hose clip
(3)
(3).
(2)
Loosely install the two bolts (8 × 35 mm) (4) and bolt (8
(1)
× 30 mm) (5).
Align the boss (6) of the vapor separator stay with the
hole (7) of the engine.
(4)
(7)
(5)
(6)
Connect the water tube F (1) to the mounting case.
(1)
5-103