TOHATSU BFT115A Service Manual page 426

CYLINDER HEAD
Apply engine oil to new O-rings (1) and install them to
the CMP sensor (2) and CMP hole plug (3).
Install the CMP sensor and CMP hole plug to the No.5
rocker shaft holder (4) and tighten the two bolts (5).
Connect the CMP sensor 3P connector (1) and install
the harness band clip (2) to the clip bracket F (3).
Install the crankshaft pulley/cam chain (page 14-11).
14-34
(1)
(3)
(5)
(3)
(2)
(4)
(1)
(2)
(1)