TOHATSU BFT115A Service Manual page 522

GEAR CASE (STANDARD ROTATION)
Set the two steel balls (#7) (1) in the steel ball
installation holes of the shift slider (2), and push the
shift slider slowly into the propeller shaft (3).
• Push the shift slider into the propeller shaft with care
not to allow the steel balls (#7) to pop out.
With the F mark (1) of the clutch shifter (2) toward the
forward bevel gear (cruising direction) (3), install the
clutch shifter onto the propeller shaft while aligning the
shifter pin installation hole (4) with the long hole of the
propeller shaft (5).
Install the shifter pin (1) while aligning the hole (2) of the
clutch shifter (3) with the hole (4) of the shift slider (5).
16-28
(2)
(3)
(1)
(2)
(3)
(1)
(4)
(2)
(1)
(4)
(5)
(5)
(3)