TOHATSU BFT115A Service Manual page 524

GEAR CASE (STANDARD ROTATION)
Remove the forward bevel gear/taper bearing (1).
Remove the eighteen needle bearing rollers (2).
Set a commercially available universal bearing puller
(1) between the taper bearing (inner race) and forward
bevel gear.
Remove the taper bearing (inner race) from the forward
bevel gear using the special tools and hydraulic press.
TOOLS:
Driver (2)
Bearing driver attachment,
44 × 49.5 mm (3)
Pilot, 25 mm (4)
Positioning the special tool in the groove (1) of the gear
case as shown, remove the taper bearing (outer race)
(2).
TOOLS:
Remover handle (3)
Remover weight (4)
Bearing race puller (5)
Remove the forward bevel gear shim (6) from the gear
case.
16-30
07749-0010000
07945-3330300
07746-0040600
07936-3710100
07741-0010201
070PC-ZY30100
(4)
(3)
(2)
(4)
(5)
(2)
(1)
(2)
(3)
(1)
(1)
(6)