WATER SEPARATOR/WATER LEVEL
SENSOR REMOVAL/INSTALLATION
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when han-
dling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
REMOVAL
Remove the L. engine under cover (page 6-4).
Release the water level sensor wires from the harness
clip.
Remove the water level sensor 2P connector from the
harness clip bracket E and disconnect it.
Clamp the fuel tubes using commercially available hose
clamps and disconnect them from the water separator.
WATER LEVEL SENSOR 2P CONNECTOR
HARNESS CLIP
BRACKET E
HARNESS CLIP
FUEL STRAINER STAY
FUEL SYSTEM
WATER SEPARATOR
TUBE CLIP (3)
FUEL TUBE C
FUEL TUBE A
STRAINER SUSPENSION
5-99