WATER SEPARATOR DISASSEMBLY/
CLEANING/ASSEMBLY
Remove the water separator (page 5-99).
Remove the three screws (1), set plate (2), water
separator cup (3) and O-ring (4) from the water
separator body (5).
Remove the baffle plate (6) from the water separator
body.
Clean off the dust or water inside the water separator
cup.
Set the baffle plate into the water separator body.
Install a new O-ring to the water separator cup.
Install the water separator body and tighten the three
screws to the specified torque.
TORQUE: 3.4 N·m (0.35 kgf·m, 2.5 lbf·ft)
Install the water separator (page 5-99).
(3)
(1)
FUEL SYSTEM
(5)
(6)
(4)
(2)
5-123