TOHATSU BFT115A Service Manual page 89

EACH OPERATION PART INSPECTION
Check each component for proper operation.
– Check the steering component for smooth operation
without excessive play when fully turned to right and
left.
– Check the shift control cable/throttle control cable for
smooth operation without excessive play.
ENGINE CONDITION INSPECTION
Start the engine and idle the engine in neutral.
Check the engine starting condition and engine sound.
Water should flow from the cooling system inspection
hole (1) while the engine is running.
POWER TRIM/TILT INSPECTION
Set the swivel case to the uppermost position.
Make sure that the power trim/tilt has no ATF leaks.
If the ATF leaks, replace or repair the faulty part (s)
(page 19-25).
MAINTENANCE
(1)
3-31