TOHATSU BFT115A Service Manual page 378

LUBRICATION SYSTEM
Install the two dowel pins (1) to the oil pump body.
Install the oil pump cover (2) and tighten the nine
screws (3) to the specified torque.
TORQUE: 7 N·m (0.71 kgf·m, 5.2 lbf·ft)
After assembly, check that the rotors rotate smoothly.
Install the oil seal (46 × 60 × 9 mm) (1) until the depth
from the oil pump body surface is 27.4 – 28.0 mm (1.08
– 1.10 in) (2) as shown, using the special tools.
TOOLS:
Driver (3)
Oil seal driver, 72 mm (4)
Install the oil seal (31 × 46 × 7 mm) (5) until the depth
from the oil pump body surface is 63.9 – 64.5 mm (2.52
– 2.54 in) (6), using the special tool.
TOOL:
Oil seal driver, 44.5 mm (7)
Apply marine grease to the lips of each oil seal.
Install the oil pump (page 12-9).
12-12
(2)
(1)
07749-0010000
07947-6340201
(4)
07947-SB00100
(7)
(6)
(3)
(2)
(1)
(3)
(5)
(1)