TOHATSU BFT115A Service Manual page 461

Install the balancer chain guide (1) to the cylinder block
(2) and tighten the two chain guide bolts (3) to the
specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Push the balancer chain tensioner (1) against the
balancer chain (2) and install it to the rear balancer
holder (3).
Install and tighten the three bolts (4).
WHEN REPLACING THE
TENSIONER WITH NEW ONE:
Install the set clip (1), which is included in the new
balancer chain tensioner, to the balancer chain
tensioner (2).
Install the balancer chain tensioner to the rear balancer
holder (3) and tighten the three bolts (4).
After installation, remove the set clip from the balancer
chain tensioner.
(3)
(4)
BALANCER CHAIN
(1)
(4)
CYLINDER BLOCK
(2)
(1)
(3) (2)
(1)
(2)
(3)
(1)
15-13