TOHATSU BFT115A Service Manual page 514

GEAR CASE (STANDARD ROTATION)
Install the shift rod holder (1) into the gear case by
aligning the projection (2) of the shift rod holder with the
recess (3) of the gear case.
Install the washer (4) and tighten the bolt (5).
After installation, check that the cutout (6) in the shift
rod splines is in the cruising direction (7).
Install the water pump (page 11-10).
16-20
(1)
(3)
(6)
(7)
(5)
(4)
(2)
(6)