INSTALLATION
Install the dowel pin (18 × 13 mm) (1), dowel pin (12 ×
16 mm) (2) and balancer case assembly (3) to the
cylinder block.
Apply engine oil to the threads and seating surface of
the bolts and tighten them to the specified torque.
TORQUE:
45 N·m (4.6 kgf·m, 33 lbf·ft) :
TWO BOLTS (10 × 105 mm) (4)
22 N·m (2.2 kgf·m, 16 lbf·ft) :
BOLT (8 × 75 mm) (5)
BOLT (8 × 50 mm) (6)
Install the crankshaft sprocket (1) by aligning its boss
(2) with the groove (3) of the crankshaft.
Check that the index mark (4) of the crankshaft
sprocket is lined up with the triangle mark (5) of the
cylinder block.
CYLINDER BLOCK
(4)
(5)
(2)
(1)
(2)
(4)
(5)
(6)
(4)
(3)
(1)
(3)
15-11