TOHATSU BFT115A Service Manual page 44

SERVICE INFORMATION
VIEWED FROM THE LEFT FRONT SIDE:
20
TP SENSOR 3P
CONNECTOR
HARNESS
BAND CLIP
19
POWER TRIM/TILT
RELAY 3P
CONNECTOR
STARTER CABLE (+) 2
POWER TRIM/TILT
MOTOR WIRE
POWER TRIM/TILT RELAY:
GND4
POWER TRIM/TILT RELAY
GROUND CABLE TERMINAL
(NOTE 1)
HARNESS
BAND CLIP
(NOTE 2)
CLIP A
NOTE 1 Power trim/tilt relay ground cable terminal installation
NOTE 2 Harness band clip installation
2-28
HARNESS
BAND CLIP
23
POWER TRIM/TILT MOTOR
TRIM ANGLE
2P CONNECTOR
SENSOR WIRE
HARNESS BAND CLIP
18
HARNESS
NEUTRAL SWITCH
BAND CLIP
2P CONNECTOR
HARNESS CLIP
Clamp the taped part of the
21
water level sensor wire and
WATER LEVEL
main wire harness.
SENSOR 2P
CONNECTOR
MAIN WIRE
HARNESS
WATER LEVEL
SENSOR WIRE
22
TRIM ANGLE SENSOR
3P CONNECTOR
HARNESS BAND CLIP
Clamp the power trim/tilt relay
3P connector wire, power trim/
tilt motor 2P connector wire and
starter cable (+) 1P connector
wire.
23
POWER TRIM/TILT MOTOR
2P CONNECTOR
24
STARTER CABLE (+) 1P
CONNECTOR
Viewed from the upper side:
HARNESS BAND
CLIP
page 2-27
page 2-27