TOHATSU BFT115A Service Manual page 678

CONTROLS
SHIFT CONTROL CABLE INSPECTION/
ADJUSTMENT
INSPECTION
Remove the front separate cover (page 6-3).
Move the remote control lever to the "N" (Neutral)
position.
Make sure that the roller (1) of the click arm is in the
groove (2) of the shift arm.
Make sure that the neutral switch tip area (3) is pushing
the click arm flat area (4).
If the roller is not in the groove, adjust the shift control
cable (page 20-17).
If the neutral switch tip area is not pushing the click arm
flat area, check the click arm for wear or damage;
replace it if necessary (page 20-8).
20-16
(1)
(4)
(3)
(4)
(2)
(1)
(2)
(3)