TOHATSU BFT115A Service Manual page 505

VERTICAL SHAFT BUSHING
REMOVAL/INSTALLATION (XC, XD and
XU type only)
Remove the gear case (page 16-8).
Remove the internal circlip (1), washer (2) and vertical
shaft bushing (3).
Inspect the vertical shaft bushing (page 16-50) and
replace if necessary.
Install the vertical shaft bushing to the extension case
(4) with its groove (5) facing up.
Apply marine grease to the vertical shaft bushing inner
surface.
Install the washer and internal circlip.
Install the gear case (page 16-9).
GEAR CASE (STANDARD ROTATION)
(4)
(5)
(3)
(2)
(1)
16-11