Engine Installation - TOHATSU BFT115A Service Manual

ENGINE REMOVAL/INSTALLATION

ENGINE INSTALLATION

Apply marine grease to the shift shaft B (1) installation
area of mounting case.
Set the shift shaft washer (2) under the shift shaft B.
Install the shift shaft B by aligning its punch mark (3)
with the punch mark (4) on shift shaft A (5).
• Do not install the engine assembly without aligning
the punch marks. Take care not to let the punch
marks get out of alignment during the engine
installation.
• Proper shifting cannot be made unless the punch
marks are aligned.
Remove the exhaust guide (1) from the exhaust
manifold (2) of the engine.
Apply marine grease to the sealing area (3) of the
exhaust manifold and exhaust guide.
Install a new exhaust guide gasket (4) and exhaust
guide to the mounting case, and loosely install the four
bolts (5).
13-6
(1)
(3)
(4)
(5)
(3)
(4)
(5)
Viewed from the under side of
the mounting case:
(2)
(2)
(3)
(1)