TOHATSU BFT115A Service Manual page 269

ENGINE COVER/COVER LOCK
Release the R. engine under cover (1) from the boss (2)
(2)
(1)
of the R. side cover bracket (3).
(3)
Remove the R. engine under cover (1).
Remove the nut (2) and water joint cap (3).
(2)
(3)
(1)
INSTALLATION
Apply locking agent (Loctite® PRISM 403 or equivalent)
(1)
to the seating surface of the nut (1).
Install the water joint cap (2) to the R. engine under
cover (3) in the direction as shown.
Install and tighten the nut to the specified torque.
TORQUE: 1.1 N·m (0.11 kgf·m, 0.8 lbf·ft)
(3)
(2)
6-11