TOHATSU BFT115A Service Manual page 372

LUBRICATION SYSTEM
OIL CASE/WATER TUBE REMOVAL/
INSTALLATION
REMOVAL
Drain the engine oil (page 3-5).
Remove the following:
– Gear case
– Standard rotation type (page 16-8)
– Counter rotation type (page 17-8)
– Extension case
– Standard rotation type (page 16-12)
– Counter rotation type (page 17-12)
Remove the bolt (1) and water tube set plate (2).
Remove the water tube (3) and water tube grommet (4).
Remove the bolt (6 × 12 mm) (1), oil level gauge (2), oil
level pipe (3) and O-ring (4).
Remove the sixteen bolts (10 × 40 mm) (5), oil case (6)
and two dowel pins (7).
Remove the two bolts (1), oil strainer (2), O-ring (3) and
oil case gasket (4).
12-6
(4)
(4)
(4)
(1)
(2)
(1)
(3)
(1)
(3)
(2)
(7)
(6)
(5)
(3)
(2)