TOHATSU BFT115A Service Manual page 283

Apply marine grease to the whole surfaces of the
washer (10 mm) (1), two wave washers (2), two cover
lock bushings A (3) and lock front shaft (4) sliding
surface of under cover front bracket (5).
Set the two cover lock bushings A, washer (10 mm) and
two wave washers to the cover lock lever (6) and install
it to the under cover front bracket.
Install the lock front shaft.
Install the washer (8 mm) (7) and E-ring (8) to the lock
front shaft.
HOOK BRACKET DISASSEMBLY/ASSEMBLY
Remove the hook bracket assembly (page 6-20).
Remove the following:
– Nut (1)
– Washer (2)
– Hook bracket (3)
– Spring (4)
– Washer (5)
– Hook damper (6)
– Cover lock bolt (7)
Apply marine grease to the cover lock bolt threads and
seating surface.
Assembly is in the reverse order of disassembly.
ENGINE COVER/COVER LOCK
(4)
(3)
(1)
(2)
(6)
(1)
(2)
(7)
(5)
(7)
(8)
(3)
(4)
(5)
(6)
6-25