TOHATSU BFT115A Service Manual page 318

STARTING SYSTEM
STARTER MOTOR DISASSEMBLY/
ASSEMBLY
DISASSEMBLY
Remove the nut (1) by pulling off the terminal cover (2)
and disconnect the motor wire (3) from the M terminal
(4).
Remove the two screws (1) and two O-rings (2).
Remove the starter solenoid (3), spring (4) and plunger
(5).
Remove the two bolts (1) and yoke/rear bracket (2)
from the front bracket (3).
Remove the packing (4) and plate (5).
9-6
(2)
(3)
(2)
(1)
(1)
(3)
(1)
(4)
(3)
(4)
(5)
(2)
(4)
(5)