ENGINE COVER/COVER LOCK
R. ENGINE UNDER COVER REMOVAL/
INSTALLATION
REMOVAL
Remove the front separate cover (page 6-3).
Disconnect the flush plug cap (1) from the R. engine
under cover.
Release the wire harness clip (1) and remove the power
tilt switch 3P connector (2) from the electric parts case
(3).
Disconnect the power tilt switch 3P connector.
Remove the six mud guard clips (1) and under cover
grommet (2).
Remove the three screws (6 x 25 mm) (1), collars (2),
and five special bolts (6 x 17 mm) (3) from the R.
engine under cover (4).
6-10
(1)
(2)
(1)
(2)
(1)/(2)
(4)
(3)
(1)
(3)