TOHATSU BFT115A Service Manual page 670

CONTROLS
SHIFT ARM/NEUTRAL SWITCH
REMOVAL/INSTALLATION
REMOVAL
Move the remote control lever to the "N" (Neutral)
position.
Remove the shift link bracket (page 20-7).
Remove the snap pin (1) and washer (2) from the shift
arm (3).
Pull the click arm (1) as shown direction and hold it,
then remove the shift arm (2) from the shift shaft B (3).
Release the fuel tube A (1) from the holder (2).
Pull the click arm (3) as shown direction and hold it,
then remove the bolt (4) and neutral switch bracket (5).
Remove the fuel tube holder (1) from the neutral switch
bracket (2).
Remove the neutral switch 2P connector (3) from the
connector bracket A (4) and disconnect it.
Remove the wire clip (5) of the starter cable (6) from
the neutral switch bracket.
Remove the clip A (7) and release the neutral switch
wire (8).
20-8
(3)
(2)
(1)
(4)
(5)
(3)
(8)
(1)
(2)
(5)
(1)
(2)
(3)
(1)
(2)
(3)
(4)
(7)
(6)