TOHATSU BFT115A Service Manual page 50

SERVICE INFORMATION
SWIVEL CASE:
CLIP
Align the tape end of the power
trim/tilt motor wire harness with
the clip end.
TAPE END
CLIP END
Viewed from the lower side:
POWER TRIM/
TILT MOTOR
WIRE
TRIM ANGLE
SENSOR WIRE
WIRE HARNESS CLIP
Clamp the spiral tube as shown.
SPIRAL TUBE
Viewed from the left side:
2-34
CLIP
Clamp the spiral tube as shown.
Viewed from the left side:
MOTOR CORD BUSHING
Align the tape end of the power
trim/tilt motor wire harness with
the clip end.
POWER TRIM/
TILT MOTOR
WIRE
CLIP
TAPE END
Viewed from the cylinder head side:
SPIRAL TUBE
POWER TRIM/TILT
GROUND CABLE
MOTOR WIRE
POWER TRIM/TILT
MOTOR WIRE
BUSHING END
Viewed from the right side:
SPIRAL TUBE
TRIM ANGLE
SENSOR WIRE
POWER TRIM/TILT
MOTOR WIRE
Viewed from the cylinder
head side:
SPEED SENSOR
TUBE
TRIM ANGLE
SENSOR WIRE