TOHATSU BFT115A Service Manual page 417

CYLINDER HEAD
Install the four harness band clips (1) to the harness clip
(3)
bracket C (2).
Set the harness clip bracket C and tighten the three
(2)
bolts (3).
Connect the A/F sensor 4P connector (4) and install it
to the harness clip bracket C.
Install the following:
– Cylinder head cover (page 14-6)
– Engine hanger B(page 7-7)
– Thermostat (page 11-5)
– Alternator belt (page 7-5)
(4)
(1)
14-25