TOHATSU BFT115A Service Manual page 518

GEAR CASE (STANDARD ROTATION)
Remove the two water seals (1) from the propeller shaft
holder (2) using a commercially available oil seal
remover.
Set a commercially available universal bearing puller
(1) between the reverse bevel gear (2) and bearing (3).
Remove the bearing from the reverse bevel gear using
the special tools and hydraulic press.
TOOLS:
Driver (4)
Attachment, 42 × 47 mm (5)
Pilot, 35 mm (6)
16-24
(1)
07749-0010000
07746-0010300
07746-0040800
(2)
(1)
(3)
(4)
(5)
(2)
(6)