CHARGING SYSTEM
Remove the four screws (1) and bearing retainer plate
(2).
Remove the two stud bolts (3) from the stator (4).
Before removing the front bearing (1), check the
bearing for abnormal play and replace if necessary.
Support the stator housing in a vise, and drive out the
front bearing using the special tools.
TOOLS:
Driver (2)
Attachment, 24 × 26 mm (3)
Pilot, 15 mm (4)
Check the alternator parts (page 7-20).
7-12
(1)
(3)
07749-0010000
07746-0010700
07746-0040300
(3)
(2)
(4)
(2)
(1)
(4)