TOHATSU BFT115A Service Manual page 281

ENGINE COVER/COVER LOCK
Remove the E-ring (1) from the cover open shaft (2).
(6)
Compress the lock lever return spring (3) by sliding the
(1)
cover lock bushing B (4), then slightly lean the shaft as
shown, so the shaft head (5) does not come in contact
with the under cover front bracket (6).
Remove the cover lock bushing B, washer (7) and lock
lever return spring from the cover open shaft.
(3)
(2)
(4)
(7)
(6)
(2)
(5)
(4)
Remove the E-ring (1), washer (2), cover lock bushing
(1)
A (3) from the front lock (4).
(2)
Release the cover lock spring (5) from the under cover
(7)
front bracket hole by pulling down the front lock.
(3)
Remove the cover lock bushing (6) from the under
cover front bracket (7) and slide it toward the front lock
side.
Turn the front lock as shown, then slightly lean the front
lock and remove it from the under cover front bracket.
Remove the cover lock bushing and cover lock hook
spring from the front lock.
Remove the bracket cap (8).
(8)
(5)
(6)
(4)
6-23