ASSEMBLY
Apply gear oil to the outer circumference of a new
needle bearing (30 x 37 x 26 mm) (1).
Install the needle bearing into the propeller shaft holder
(2) until the specified depth, using the special tools and
hydraulic press.
• Install the bearing with its marked side facing the
special tool.
TOOLS:
Attachment, 30 × 37 mm (3)
Attachment, 62 × 68 mm (4)
VERTICAL SHAFT DISASSEMBLY/
ASSEMBLY
DISASSEMBLY
Remove the oil slinger (1) from the vertical shaft (2) by
expanding the cut in the oil slinger with a screwdriver or
equivalent.
• Do not expand the slinger more than necessary, or it
will be damaged.
GEAR CASE (COUNTER ROTATION)
070PD-ZY60200
07746-0010500
(3)
(2)
(2)
(2)
(4)
(1)
(1)
1 mm
(0.04 in)
(1)
17-37